Stanley - Multi-Code - Linear Residential And Commercial Receivers Garage Door Opener And Gate Operator Controls |
Replacement Multi-Code Stanley Garage Door Opener and Gate Operator Receivers...
Multi-Code And Stanley Receivers by Linear
The receiver can operate from 12-30 volts AC or 10.5-30 volts DC and are normally powered from the operator.
Their relay contact(s) are rated at 30 VAC/DC up to 5 Amps.
The receiver support transmitters that use the Multi-Code format (300 MHz), as well as the Stanley compatible (310 MHz) format.
Both formats support 1,024 system codes for the MCS109950 (system codes are easy to set via dip switches).
Their relay contact(s) are rated at 30 VAC/DC up to 5 Amps.
The receiver support transmitters that use the Multi-Code format (300 MHz), as well as the Stanley compatible (310 MHz) format.
Both formats support 1,024 system codes for the MCS109950 (system codes are easy to set via dip switches).
- Dual frequency - Multi-Code or Stanley compatible; jumper selectable
- 12-24 Volts AC or DC
- Auto voltage sensing - no jumpers to set, Single relay
- Supplied with whip antenna, three feet of coaxial cable and bulkhead connector
- Power: 12-30 VAC or 10.5 - 30 VDC; 16 mA nominal, 50 mA maximum while relay is triggered
- Frequency: 300 MHz and 310 MHz, Dimensions: 3.625 x 5.25 x 1.5 inches
- Programing Instructions
Stanley One Door or One Gate Receiver - Models 1099-50, MCS109950, 109950
Requires 10 Switch, 2 position settings
Requires 10 Switch, 2 position settings
The receiver can operate from 12-30 volts AC or 10.5-30 volts DC and are normally powered from the operator.
The receiver supports transmitters that use the Multi-Code format (300 MHz), as well as the Stanley compatible (310 MHz) format.
Both formats support 1,024 system codes for the 512 system codes for the MC302850 (system codes are easy to set via dip switches).
The receiver supports transmitters that use the Multi-Code format (300 MHz), as well as the Stanley compatible (310 MHz) format.
Both formats support 1,024 system codes for the 512 system codes for the MC302850 (system codes are easy to set via dip switches).
- Dual frequency - Multi-Code or Stanley compatible; jumper selectable
- 12-24 Volts AC or DC
- Auto voltage sensing - no jumpers to set, Single relay
- Supplied with whip antenna, three feet of coaxial cable and bulkhead connector
- Power: 12-30 VAC or 10.5 - 30 VDC; 16 mA nominal, 50 mA maximum while relay is triggered
- Frequency: 300 MHz and 310 MHz, Dimensions: 3.625 x 5.25 x 1.5 inches
- Programing Instructions
Stanley Two Door or Two Gate Receiver - Models 3028-50, MCS302850, 302850
Requires 10 Switch, 2 position settings
Requires 10 Switch, 2 position settings
| The MCS109950 Receiver Replaces The Following Items MCS109930, MCS109931, MCS109940 |
| $51.95 |
| $57.95 |
| $6.95 |
DC5196 24 Volt Harness Adapter with Push/On Connection
- Connects to the operator's three terminal screws and tabs as shown
- Allows receiver to be mounted with in 3 feet of the opener
- Length: 3 feet.
DC5197 110 Volt Adapter With Harness
- New style with Push/On Connection
- Quick connection 3 Tab receiver spade lugs with lug connections for the operator push button terminals.
- Length (adapter to tabs): 6 feet.
1066-04 Local Replacement Antenna
- Soft plastic connector boot.
DC5166-03 Co-Axial Cable Mounting Kit
- To be used in conjunction with the light-commercial receivers.
- This is a 13 foot length of co-axial cable, with Type F fittings at both ends.
- The mounting bracket is 5-1/4" long, with a 2-1/2" outward extension
| $14.95 |
| $24.95 |
| $8.95 |
Receiver Accessories
The Model 309013 1-Channel Receiver is designed for use in residential garage door operator applications.
Typically the receiver mounts directly to the three terminals on the door operator.
An 11-inch wire antenna extends from the receiver.
The operator supplies 24-volt power to the receiver, or the receiver can be powered by a separate (optional) 24-volt AC power transformer.
The receiver is programmed with a 10-position coding switch.
When a transmitter set to the same code is activated, the receiver's output will activate, triggering the door operator.
The Model 309013 is compatible with 310 MHz Stanley and Multi-Code transmitters only.
Features:
Typically the receiver mounts directly to the three terminals on the door operator.
An 11-inch wire antenna extends from the receiver.
The operator supplies 24-volt power to the receiver, or the receiver can be powered by a separate (optional) 24-volt AC power transformer.
The receiver is programmed with a 10-position coding switch.
When a transmitter set to the same code is activated, the receiver's output will activate, triggering the door operator.
The Model 309013 is compatible with 310 MHz Stanley and Multi-Code transmitters only.
Features:
- Operates on 24 VAC power
- One channel
- Codes: 1,024 (set by dip switches)
- RF frequency: 310 MHz
- Dimensions: 3" W x 5.5" H x 1.5"
Multi-Code Stanley One Door or One Gate Receiver - Models 309013, MCS309013, 3090-13
Requires 10 Switch, 2 position settings
Requires 10 Switch, 2 position settings
| $36.95 |
| Multi-Code® and Linear® are registered trademarks of the Linear Corporation. Stanley® is a registered trademark of the Stanley Corporation. Copyrighted 2013 StanleyRemotesOnline.com | All Payments Are In US Dollars Only | All Rights Reserved |
| Monday - Friday Orders Ship In 24 Hours! |
 |  |  |  |  |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |